DALI2 Dimmable LED Linear Drivers With Up To 70W With Multiple Output Current From 700mA To 1400mA
| Operating Voltage: | 198-264Vac 50Hz /60Hz |
|---|---|
| Rated Input Voltage: | 220-240Vac 50Hz /60Hz |
| Stand-by Power: | ≤0.5W（@230Vac When PUSH Or DALI Turn Off） |
DALI Dimmable LED Driver for KL120V-PDiiV1 Built-in DALI Interface Short Circuit Protection
| Approvals: | CE |
|---|---|
| Rated Supply Voltage: | 220~240Vac 50Hz /60Hz |
| DALI Function: | DALI Dimming |
90W Constant Voltage 12V DALI Dimmable LED Strip Driver With 5 Years Warranty
| Approvals: | CE |
|---|---|
| Rated Supply Voltage: | 220~240Vac 50Hz /60Hz |
| DALI Function: | DALI Dimming |
UL Approved 1-10V Microwave Sensor 3-6m Mounting Height For Corridor Function
| Rated Voltage: | 120/277VAC 50/60Hz |
|---|---|
| Stand-by Power: | ≤1W |
| Output Dimming Mode: | 0-10VDC Dimming Signal/ ON/OFF Signal |
120V / 277Vac Input LED Controller With 12V Auxiliary Power Port And 1-10V Dimming
| Rated Voltage: | 120/277V AC 50/60Hz |
|---|---|
| Stand-by Power: | ≤0.5W |
| DC Output: | 12VDC 100mA(Max) |
120V / 277Vac Input Light Control Sensor Switch With 12V Auxiliary Power Port And 1-10V Dimming
| Rated Voltage: | 120/277V AC 50/60Hz |
|---|---|
| Stand-by Power: | ≤0.5W |
| DC Output: | 12VDC 100mA(Max) |
10m Mounting Height 12Vdc Dry Contact Infrared PIR Motion Sensor Detector IP20
| Input Voltage: | 12Vdc/24Vdc |
|---|---|
| Working Current: | 20mA MAX. |
| Stand-by Power: | ≤0.5W |
10m Mounting Height ON/OFF Function Long Distance Pir Sensor Standalone Design
| Input Voltage: | 100-240Vac |
|---|---|
| Working Current: | 20mA MAX. |
| Stand-by Power: | ≤0.2W |
6.4V 1800mAh Constant Power 3W Auto-test Emergency Packs With Battery Lifepo4 And 3 Years Warranty
| Rated Input Voltage: | 220-240Vac 50Hz /60Hz |
|---|---|
| Emergency Power: | 3W(Can Be Customized) |
| Emergency Time: | 180min (Can Be Customized) |
24GHz Large Detection Area Millimeter Wave Radar Presence Sensor With Detecting Angle Adjustable For Bedroom
| Working Voltage: | 12/24Vdc |
|---|---|
| Communication Mode: | NO/NC Dry Contact (Factory Setting Is NO Dry Contact) |
| MW Sensor Frequency: | 24GHz-24.25GHz ISM Band |